- Jul 6, 2021
- 204
- Pool Size
- 40000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
Is there anything that would be consuming CYA? When I opened the pool this year, tests were showing very little CYA. I figured it had just been consumed/degraded over winter. I added 14lbs of dry stabilizer, which should have increased my CYA to 42. I have been struggling keeping my chlorine levels up, which I'm assuming is related to my CYA levels. When I tested CYA this morning it basically looked like it was at 0 again (water in the tube was pretty clear even when completely full). I'm planning on adding 10 lbs, and I'll see where that gets me. Is there anything that could be causing this?
Last Levels:
FC: 2
CC: 0
PH: 7.6
CYA: 0 (10 maybe??)
TA: 130
CH: 375
Temp: 88
Last Levels:
FC: 2
CC: 0
PH: 7.6
CYA: 0 (10 maybe??)
TA: 130
CH: 375
Temp: 88