HI everyone:
We have the Royal Entrance Steps for our 18 ft. above ground pool. 10 years old - cracks in the bottom two steps in the corner have developed. Also need a new flange on that side - currently being held by good old duct tape! Considering replacing stairs, but then thought maybe something can be placed on the cracks to fill them in. Steps are still sturdy overall. Supplier suggested that the kind of material in those steps could be heated with a heat gun and seal the crack that way. Looking for something that would not necessitate buying a heat gun... any silicone or other type of sealant that would do the trick? Thanks for all suggestions and hope you are all enjoying your pools!
We have the Royal Entrance Steps for our 18 ft. above ground pool. 10 years old - cracks in the bottom two steps in the corner have developed. Also need a new flange on that side - currently being held by good old duct tape! Considering replacing stairs, but then thought maybe something can be placed on the cracks to fill them in. Steps are still sturdy overall. Supplier suggested that the kind of material in those steps could be heated with a heat gun and seal the crack that way. Looking for something that would not necessitate buying a heat gun... any silicone or other type of sealant that would do the trick? Thanks for all suggestions and hope you are all enjoying your pools!