I have a problem with one of my Pentair AmerBrite LED color lights that I just can't seem to figure out (there are 4 in the pool- 3 work fine). The light was flickering and finally went out a month ago. Thinking it was a leak, I pulled the light to find it bone dry. Upon cleaning and testing before re-installing I found the light was still not working. I checked the volts at the pool light and it was 118. I brought the LED light (it is 2 parts- the LED light and the 12V transformer that takes the 120V to 12V) inside and hooked it up to a floor lamp- no problem it all worked great. Went back out to the pool fixture, put back in and still no light. I checked the output at the 12V transformer and it is only showing 6V. Took it all back inside, plugged into the floor lamp, checked the 12V transformer and it was reading 12V. Somehow I am losing 6V between my power in at the pool light (which still reads between 115V and 118V) and what is coming out of the transformer which only reads 6V. Any suggestions to track this problem down? All 3 of the other lights are working great (all are the same Ameribrite lamps) and all work off the same switch at the Jandy controller.
Thanks.
Thanks.