Friends,
I started opening my pool a week ago and the water is very cloudy. I can’t see the bottom of the pool on the shallow end.
After a few days, i decided I should change out the sand in the filter, it hadn’t been replaced in years. After doing so, I had to backwash every two hours because the PSI kept rising. This last for about a day.
Now, the PSI stays steady at 10. It’s been a full day and the cloudiness isn’t improving.
Both my skimmer and drain have suction. My CYA is low, and I’m in the process of slamming the pool. Again.
Please wise ones. What should I do? Pool flocc?
------------------------------------------
Maintenance 06-14-2022 @ 07:36 AM
------------------------------------------
Vacuumed, Cleaned Filter, Backwashed, Brushed
------------------------------------------
Test Results 06-14-2022 @ 07:18 AM
------------------------------------------
Free Chlorine: 10.0
Combined Chlorine: 0.5
Total Alkalinity: 90
Calcium Hardness: 250
CYA: 20
I started opening my pool a week ago and the water is very cloudy. I can’t see the bottom of the pool on the shallow end.
After a few days, i decided I should change out the sand in the filter, it hadn’t been replaced in years. After doing so, I had to backwash every two hours because the PSI kept rising. This last for about a day.
Now, the PSI stays steady at 10. It’s been a full day and the cloudiness isn’t improving.
Both my skimmer and drain have suction. My CYA is low, and I’m in the process of slamming the pool. Again.
Please wise ones. What should I do? Pool flocc?
------------------------------------------
Maintenance 06-14-2022 @ 07:36 AM
------------------------------------------
Vacuumed, Cleaned Filter, Backwashed, Brushed
------------------------------------------
Test Results 06-14-2022 @ 07:18 AM
------------------------------------------
Free Chlorine: 10.0
Combined Chlorine: 0.5
Total Alkalinity: 90
Calcium Hardness: 250
CYA: 20