- Jul 29, 2008
- 317
- Pool Size
- 9000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- CircuPool Universal40
Maybe this appears elsewhere but here it is again. What to do when the CircuPool has the Check Salt and Cell Maint. lights on but you know that the salt level is good and you just cleaned the cell?
This worked for me:
1. Move the switch to off.
2. Push the System Status button until the LCD shows the salt level or 0000.
3. Move the switch from Off to Auto quickly five times.
This should reset the display and the Check Salt and Cell Maint. lights should go out.
Hopefully, it will work for you.
This worked for me:
1. Move the switch to off.
2. Push the System Status button until the LCD shows the salt level or 0000.
3. Move the switch from Off to Auto quickly five times.
This should reset the display and the Check Salt and Cell Maint. lights should go out.
Hopefully, it will work for you.
