Chlorine issues **need help

[Cbpm04]

Hello everyone.
I’ll give a bit of background quick
Outdoor fiberglass
15,000-20,000 gallons
SWG
Use a solar cover most of the time.
In Virginia Beach

-just tested my pool water and I’m stumped
Took a sample of the shallow end next to an output and the deep end
These levels came out the same
Alkalinity 60
Cyanuric Acid 60
Calcium Hardness 150
Ph 7.7

But deep end was
FC-10
TC-5
CC-5
Shallow end was
FC-10
TC-10
CC-0

Ideally I would like to raise my hardness and CYA but I’m concerned with my chlorine levels.

Thanks

 

[Sunnydaze]

What test kit are you using to test?

 

[Cbpm04]

What test kit are you using to test?

The Taylor complete DPD test kit

 

[duraleigh]

Welcome to the forum

You have no reason to raise your CYA and increasing your CH is quite simple. There is no reason to test different parts of your pool unless you are not running your pump enough. What does your water look like?

 

[Cbpm04]

Welcome to the forum

You have no reason to raise your CYA and increasing your CH is quite simple. There is no reason to test different parts of your pool unless you are not running your pump enough. What does your water look like?

It’s clear. Should I be worried that my chlorine is so high?

 

[mknauss]

Your TC , a useless value, is the combination of FC and CC.