Hello,
I'm trying to get my chemical levels correct and need a little help. We replaced the liner last week so I'm starting from scratch. I added salt, baking soda and calcium chloride per my local pool store in getting started. Note: I added 3 more bags of salt then their recommended 16 because my levels were showing slightly low on my SWG at 2300. However they jumped way up there after adding just those 3 bags to 4300, as shown on swg?
These are my chemical levels according to TF100 and Taylor sodium chloride (salt) test.
1. FC = no reading
2. CC = no reading
3. TC = no reading
4. Calcium = 225
5. TA = 110
6. Sodium chloride = 5000
7. CYA = haven't added so didn't test
My Hayward SWG says it is generating so does it take several days for my chlorine levels to read? Should I add fresh water in getting the salt level down or not worry about it?
Thanks,
Ralph
I'm trying to get my chemical levels correct and need a little help. We replaced the liner last week so I'm starting from scratch. I added salt, baking soda and calcium chloride per my local pool store in getting started. Note: I added 3 more bags of salt then their recommended 16 because my levels were showing slightly low on my SWG at 2300. However they jumped way up there after adding just those 3 bags to 4300, as shown on swg?
These are my chemical levels according to TF100 and Taylor sodium chloride (salt) test.
1. FC = no reading
2. CC = no reading
3. TC = no reading
4. Calcium = 225
5. TA = 110
6. Sodium chloride = 5000
7. CYA = haven't added so didn't test
My Hayward SWG says it is generating so does it take several days for my chlorine levels to read? Should I add fresh water in getting the salt level down or not worry about it?
Thanks,
Ralph