Salt reading was 2600 ppm. I added 80 lbs (18,000 gal) System now reads low salt with Check System light on. Chlorinator System Off--check salt level.
T-Cell 15 that's 3.5 years old. Pinch a Penny water analysis reads 3700 ppm and good chlorine level. Chlorine levels read different when the polarity is changed. One reads 1700ppm (+27.36V +4.37A) and the other reads 400ppm (-28.80V -1.92A). Did I ruin my T-Cell or board by adding the salt with the system running? I didn't know that could cause damage. I've always added salt with the system running normally. Or has the T-Cell reached it's end?
Thanks
T-Cell 15 that's 3.5 years old. Pinch a Penny water analysis reads 3700 ppm and good chlorine level. Chlorine levels read different when the polarity is changed. One reads 1700ppm (+27.36V +4.37A) and the other reads 400ppm (-28.80V -1.92A). Did I ruin my T-Cell or board by adding the salt with the system running? I didn't know that could cause damage. I've always added salt with the system running normally. Or has the T-Cell reached it's end?
Thanks