CH high reading

[Envieddesigns]

Good day,
I recently bought new reagents, I’m not sure if the readings are off because of one of two things.

I noticed the bottle R-0011L
Seems a bit thick is that normal should it be more fluid like?

Also R-0012
The droplets that come from the tip seem smaller compared to previous bottle.

Is there some sort of test I can do to ensure the reagents are doing their thing?

 

[Rancho Cost-a-Lotta]

Try out the tip from the old bottle. Check out this post...

CH sky high...

I'll order a speedstir and some more r-0012 from amazon, I'll get the r-0012 C size ;) I'll retest when I get the speedstir and be sure to let the drops form. Thanks again everyone!!! The speed stir makes testing 1000000000% easier and more consistent. That estimation is mine and not...

www.troublefreepool.com

 

[Envieddesigns]

Try out the tip from the old bottle. Check out this post...

CH sky high...

I'll order a speedstir and some more r-0012 from amazon, I'll get the r-0012 C size ;) I'll retest when I get the speedstir and be sure to let the drops form. Thanks again everyone!!! The speed stir makes testing 1000000000% easier and more consistent. That estimation is mine and not...

www.troublefreepool.com

I reached out to TF test kits and I was advised to wipe the tip on the bottle that it could be caused by static.
Sure enough a wet paper towel did the trick. Drops are bigger and results took way less drops. I knew something was up I was going 50 sometimes 60 drops. Thanks!!