So I did a favor this morning for a friends friend. New house that has a pool, and all kinds of rigging was done to the pool equipment. Guy tried to DIY and didnt get past cutting the PVC. Long story short I didnt charge him about 400ish in labor and ended up with a few year old hot.springs limelight flair. They were gonna give away at some near future I couldnt say no and they thanked me to high heaven for the comp and getting it out of there. Theyre not hot hot tub people I guess.... I was gonna sell it...it's really nice but the boss and her henchmen saw it on the trailer. Like I dont have enough to worry about.....
Came home with a hot tub today....
- Thread starter jimmythegreek
- Start date
- Jun 1, 2018
- 16,231
- Pool Size
- 26000
- Surface
- Vinyl
- Chlorine
- Salt Water Generator
- SWG Type
- Hayward Aqua Rite (T-15)
Get her hooked up yet? I would be happy to advise you if you need. Hot Springs are set up for 2 gfci breakers, but there are ways around that if you are put off by the pricetag of the HS breaker box. You can use a single 50 amp in your pool panel. Cheapest place to get one is in a spa disconnect panel from home depot. About $100.
I dont even have a spot for it yet. I gotta bring the mini home this weekend and dig a spot next to my patio for it. I'm thinking by 4th of july I'll have it running. I removed it and took all the wrong and disconnect I saw the double breaker setup. They didnt know anything so I left it nice and unhooked the feed from the panel right inside and even patched their foundation hole and the panel spots.
Thanx for the offer I'll reach out with any questions. I get the basics of it, its opposite of a pool kind of. Haven't looked to see if it ozone or swg setup the guys loaded it while I did the electrical and had to run for supplies to plug panel so never looked its sitting on trailer still in the shop
Thanx for the offer I'll reach out with any questions. I get the basics of it, its opposite of a pool kind of. Haven't looked to see if it ozone or swg setup the guys loaded it while I did the electrical and had to run for supplies to plug panel so never looked its sitting on trailer still in the shop