It runs from 7am.to 8pm. I'm not quite sure how to set it for different speeds for different times yet.
Show a screenshot of your Schedule.
With your current VS speed set up, when in Pool Mode the pump will run at 2500rpm. With a SWCG, you should be able to lower that speed. I ran mine at 1500rpm and it activated the flow switch on my AquaPure 1400. We can show how to lower the speed and still have the SWCG active.
You can change Speed 4 - note I would change this Label to something that makes sense such as Mid Speed, to either a higher or lower speed. Then in the Schedule process, you select ADD and then select Speed 4 (or whatever label you set), then set a start and stop time, then tap SAVE So the speed will change when the start time is reached.
However there are a couple of key rules
Always have the Pool speed as the lowest speed that you want to run as that is the default speed. Currently it is set at 2500rpm and is the lowest speed but I think you should be able to lower it more and still be Ok with the SWCG.
Always set the Filter Pump schedule to be the longest duration you want the pump to run. Let’s say you want 14 hours so the Filter Pump would be set 5am to 7pm. It will run at the Pool Speed.
Set any other schedule to be within the Filter Pump times. So for example, you want Mid Speed (my label which is set for 2750rpm) to run for 4 hrs. Then schedule Mid Speed from 10am to 2pm.
The pump will turn on at 5am and the Pool Speed (say 2000rpm), then at 10am the pump will automatically ramp up to 2750rpm, then at 2pm the pump will ramp down to 2000rpm.
When 2 schedules overlap, the pump will run at the higher of the 2 speeds. That is why you want to have the Pool speed set as the lowest speed for any given time.
The AquaLink system will not run 24 hrs (unless Jandy made a change on their latest revision). So you have to have the pump scheduled something less than- I had mine set from 5am to 4:45am (23 hrs 45 mins). I had the Pool speed at 1500rpm and set 2 schedules daily to ramp up to increase skimming speed. My SWCG was active for the full 23 hrs and 45 mins as 1500rpm was sufficient to activate the flow switch.
Focus on the FC now but when you want to set up the schedule - just ask. But show your current schedule so it is easier to guide you.