Just bought a house with an in-ground pool, don't know much about it. We replaced the pump, hoses, filter handle, filter sand, and pressure gauge. We removed the two plugs from the sides of the pool and the gizzmo, then primed the new pump. The pressure gauge is still reading 0 and there is no water flow. Any advice you have would be more than welcome! We live in an area where we are unable to get a professional to come out and have made many trips to the closest pool store with no luck so far.
Bought a house with in-gound pool, no water flow through system
- Thread starter jhstevens1063
- Start date
GOONiE
0
- Jul 21, 2013
- 53,115
- Pool Size
- 35000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
More pics of where the black hoses go to and a pic of the pool skimmer and return areas may help us get a complete picture of your situation.
