Blower hook-up with OmniLogic

[ajw22]

GGC,

If your system is like mine, any relay can be plugged into any port on the main card.

Jim, look at the pic in post #11. It looks like 4 relays connect into an 8 wire connector and the relays do not have individual connections.

@Golferguycouple do any of your relay controlled equipment turn on and off properly? I only see one 120V circuit connected to the top left relay.

 

[JamesW]

Is the 8 wire plug plugged into the correct plug socket on the circuit board?

 

[ajw22]

What does this mean...?
I'm trying to update the firmware and I got that error message

@PoolBrews can you help on the update?

 

[Golferguycouple]

Jim, look at the pic in post #11. It looks like 4 relays connect into an 8 wire connector and the relays do not have individual connections.

@Golferguycouple do any of your relay controlled equipment turn on and off properly? I only see one 120V circuit connected to the top left relay.

Yes, the one you see is for the Lights... I need to check and ensure that I have the Blower set up to the HVR and not the LVR - I will when I get back home.