I'm closing up my pool and I'm trying to see how to blow out the equipment. I can blow out the returns when I remove my SWG. I blow out the skimmer by putting the blower in the suction side of the pump. But I need to get the equipment and lines in the middle. Can I set my multiport to Recirculate and blow through the pump from the pump basket?
Blow Air Through Pressure Side of Pump?
- Thread starter manthemike12
- Start date
- Jun 24, 2021
- 16,926
- Pool Size
- 29000
- Surface
- Vinyl
- Chlorine
- Salt Water Generator
- SWG Type
- CircuPool RJ-60 Plus
- Jun 24, 2021
- 16,926
- Pool Size
- 29000
- Surface
- Vinyl
- Chlorine
- Salt Water Generator
- SWG Type
- CircuPool RJ-60 Plus
EDIT: got fooled by @Newdude posting a question...LOL
A couple threads and a guide to help...
www.troublefreepool.com
www.troublefreepool.com
www.troublefreepool.com
A couple threads and a guide to help...
Brand New Pool Owner Closing Pool?
While I believe I got a handle on the chemistry side of things I have to admit the thought of closing my pool by myself scares me. It seems to be such a complex process and if I screw it up it will cost thousands to repair. As a brand-new pool owner should I hire my pool builder for the...
www.troublefreepool.com
Explicit directions need to closing and blowing line using a cyclone
I recently purchased a cyclone and have the water level down past the skimmers but still above jets I have 2 of rack and 2 main drains. Pool people broke the line to the 2 skimmers that I could and each had their own valves and replaced it with one that open or close them both at the same time...
www.troublefreepool.com
Closing Pool for Winter - Further Reading
www.troublefreepool.com
Last edited: