Not sure if this question is as basic as I think it is but here goes.
Pool was just opened by pool company. Pool was green due to mesh safety cover. Pool company put some chemicals in but I wasn't home and don't know what they put in it....I'm thinking it was some cal-shock or something. I do know that pool was green initially and a day later the green is gone but pool still needs work as it's pretty cloudy.
Here is my basic question as I'm still learning.
FC reads 0. I put in 128 oz of 10% bleach and tested 12 hours later and FC still reads 0.
PH = >8 very purple. I did 128 oz of acid it's now at 7.4
My ALK was at 90
My CYA didn't measure...guess it's 0.
Hardness = 250
Water is cold at 66 degrees and it's raining.
According to pool school 128oz of 10% should raise my FC by 3.8. see screenshot
With that information, I guess it's safe to say that i'm surely in need of a SLAM.
Thanks in advance to this awesome forum!
Pool was just opened by pool company. Pool was green due to mesh safety cover. Pool company put some chemicals in but I wasn't home and don't know what they put in it....I'm thinking it was some cal-shock or something. I do know that pool was green initially and a day later the green is gone but pool still needs work as it's pretty cloudy.
Here is my basic question as I'm still learning.
FC reads 0. I put in 128 oz of 10% bleach and tested 12 hours later and FC still reads 0.
PH = >8 very purple. I did 128 oz of acid it's now at 7.4
My ALK was at 90
My CYA didn't measure...guess it's 0.
Hardness = 250
Water is cold at 66 degrees and it's raining.
According to pool school 128oz of 10% should raise my FC by 3.8. see screenshot
With that information, I guess it's safe to say that i'm surely in need of a SLAM.
Thanks in advance to this awesome forum!