- May 4, 2010
- 12
We had an inground pool installed late last summer with an Autopilot Salt System. They basicly set up the pool and got it ready for winter since we were not moving into our new house anytime soon. We just moved in and I started to get the water all clear now. But I noticed there is no chlorine being measured on my strip test. I have the right amount of salt added and the water is pretty balanced. I had to had 3 gallons of myratic acid to lower the PH and added 4lbs of Stabilizer.
I had to set up the Auto pilot myself as the installer way to busy to return my calls. I set the pool valume to 24,500. But what cell power should I have it set at, plus the purifier level set at what level? Also how often should I do a Force Reverse and self cleaning? So many questions and hope ya'll can help me out on this.
Pool is 18x36 Digital Autopilot system with heat pump. My cell is sc-36...The dealer said that is what I should have instead of the higher SC models...is that right?
I had to set up the Auto pilot myself as the installer way to busy to return my calls. I set the pool valume to 24,500. But what cell power should I have it set at, plus the purifier level set at what level? Also how often should I do a Force Reverse and self cleaning? So many questions and hope ya'll can help me out on this.
Pool is 18x36 Digital Autopilot system with heat pump. My cell is sc-36...The dealer said that is what I should have instead of the higher SC models...is that right?