I have an Auto pilot nano plus with Rc 28 on my 13K gallon fiberglass pool. This is the third year for the unit. At the end of last year, I noticed I had to bump up the % to keep the chlorine level up enough.
This spring, I soaked the RC-28 in sw generator cleaner, even though I could not see any build up on the plates. After "slamming" my pool a few weeks ago, the chlorine level dropped all the way to zero, even though I'm running the SWG at 100% for 10 hours a day.
I was about to order a new RC-28 unit and realized they are around $400! What should I do to troubleshoot? I can't tell if it's making any chlorine at all. I have to add bleach every few days to keep the FC up. Should I test the voltage at the unit?
Thanks
TOm
This spring, I soaked the RC-28 in sw generator cleaner, even though I could not see any build up on the plates. After "slamming" my pool a few weeks ago, the chlorine level dropped all the way to zero, even though I'm running the SWG at 100% for 10 hours a day.
I was about to order a new RC-28 unit and realized they are around $400! What should I do to troubleshoot? I can't tell if it's making any chlorine at all. I have to add bleach every few days to keep the FC up. Should I test the voltage at the unit?
Thanks
TOm