Aquatrol with no display or LEDs

j3thomas

New member
Sep 24, 2022
3
Clearwater, FL
Noticed the pump wasn't on and there was no lights or display. Going through the steps and when I check the red and black wires coming from the rectifiers I'm only getting 9 v...does this mean they are bad or would I not show 0 if they were bad?

Unit is only like 3 years old so I'm somewhat surprised something went bad already....or maybe nothing should surprise me anymore
 
Welcome to TFP.

Do you have 24V AC between the two yellows out of the transformer into the rectifiers?
 
24 Volts AC into the rectifiers and 9V DC out says the rectifiers are bad.


https://www.mouser.com/
Mouser #: 583-MP356
Mfr. #: MP356
Mfr.: Rectron
Description: Bridge Rectifiers 35A 600V

2807-18.jpg


 
You may find this thread helpful. for rectifier replacement..

 
Thread Status
Hello , This thread has been inactive for over 60 days. New postings here are unlikely to be seen or responded to by other members. For better visibility, consider Starting A New Thread.