AquaSwitch remote panel - How to remove faceplate??

[PanoRidge]

I'd rather not end up damaging the 20+yr old installation on my AquaSwitch
remote switch box, but I need to replace the switches (one is bad).

How the heck does one remove the faceplate to access the switches & wiring?

Jandy is of no help; keep telling me to 'call your local pool professional' due to 'liability issues'. Putzes.

 

[ajw22]

Welcome to TFP.

Post pics of your actual box and maybe we will see something. You see any plugs that can hide screws?

Maybe @ogdento has been into the box.

 

[ogdento]

Sorry folks, I've never tinkered with one of those

 

[PanoRidge]

Thanks for replies. Finally able to get some pics to post:
From the installation manual, it shows a gasket with 4 screw holes in the face, but no
way to remove the face decal or switch cover I can find. (You can see where I tried
to peel back the covering to expose any screws).
This would be a poor way to construct this & make serviceable.

 

[Pool_Medic]

That face plate just snaps on I believe. Try to feel around the back of it for the tabs to release it.

 

[JamesW]

Maybe locate the screws with a magnet and cut a small hole in the decal to access the screws.