- Jun 20, 2016
- 29
- Pool Size
- 25000
- Surface
- Vinyl
- Chlorine
- Salt Water Generator
- SWG Type
- Hayward Turbo Cell (T-CELL-5)
Hey all, I've had a problem lately where my SWCG doesn't show any lights on after a few minutes. It continues to display the Salt level and I can go through the diagnostics button but I'm wondering if it needs to be replaced or if there's some trouble shooting I can do to potentially solve it. Everytime I turn the SWCG off and back on the Power and Generating light kick on and then shut off after only a minute or two. Is it possibly a bad salt cell causing it? The one currently installed is over 5 years old according to the previous owner (not sure how old due to purchasing the house last year). Since the display showing the salt level works I don't think it's anything on the main board but I wasn't sure what to check or how to check it. It's frustrating right now because I'm SLAM-ing my pool and the extra CL2 from the SWCG would be nice. Also it won't do any good to SLAM and then not have the SWCG working which would require me to use more bleach. Let me know if you have any questions and thank you!
Salt Level = 2800 (I know it's a little low but I'm not sure that's the problem) Will add salt after the SLAM is finished.
Salt Level = 2800 (I know it's a little low but I'm not sure that's the problem) Will add salt after the SLAM is finished.