Aquarite automation with VS Omni require relay?

[Krysib]

Hi Everyone!

Just converting over to a SWG. My question is if I wanted to control my Hayward Aquarite controller via a VS Omni automation system, does it require both an open relay AND the daughter board? Or does it work with just the daughter board.

I already have three relays controlling the pool light, spa light and blower.

 

[ajw22]

You just need the daughter board, not a relay. You will find the daughter board manual linked to this thread...

New Install of Omni Hub - AquaRite Integration?

Hello Everyone, New Member here. I am planning out my pool system upgrade and I have a question someone might be able to answer for me. I purchased a Hayward MaxFlo VS 500 Omni to replace my old single speed Jandy. I currently run a SW system with Solar with no Hot Tub, just a fountain. The...

www.troublefreepool.com

 

[Krysib]

Thanks @ajw22!
Yes, I have the manual downloaded. Just don't have much technical knowledge on what the relay actually does besides on/off lights. Triple checking prior to ordering the board. Thanks for your reply!