I have a salt cell that has a serial # of C10GA0191 I am thinking that the date of manufacture is somewhere in this but I am not sure? Trying to help a friend out and took it apart yesterday and was FULL of deposits.....I cleaned it in about a 10% solution of MA and water and after several attempts it looked much better!!! I cleaned the tri-sensor as best I could at the time but still getting 170 and 182 error codes. So long story short I found replacement cell AND sensor for $529 and cell only for $489 with the sensor costing $199 or so I think???? So if the date code on the old cell is the "01" then I will suggest she replace both cell and sensor.....might try only sensor if the "10" is date code....make any sense at all???
Thanks Guys and Gals!
Brent
Thanks Guys and Gals!
Brent