Hi Allen,
I'm sorry. Yes, I err'd when I was making my list and propagated the error through my list.
This is controlled by iAqualink.
I am wondering if this is the correct setup to get the functionality I want.
Here is the corrected list.
1 VSP = For pool/spa combo, including filtration, deckjets, cleaner,
1 Non-VS Pump = independent plumbing for the waterfall.
JSA 1 = Intake JVA
JSA 2 = Return JVA
JSA 3 = Cleaner JVA
JSA 4 = Deckjet JVA
Relay socket "F. Pump" ---to---> Filter Pump Relay (#1) - Salt (comes on when the pump is on in pool mode)
Relay socket "Aux 1" ---to---> Aux Relay (#1) - Waterfall pump
Relay socket "Aux 2" ---to---> Aux Relay (#2) - Lights
Relay socket "Aux 3" ---to---> (not used)
Filter Pump Relay (#1) - Salt (comes on when the pump is on in pool mode)
Aux Relay (#1) - Waterfall pump
Aux Relay (#2) - Lights
Aux Relay (#3) - not used
S1 Dip Switches
#1 - Off
#2 - Off
#3 - ON
#4 - Off
#5 - Off
#6 - Off
#7 - ON
#8 - Off
Right now the Deckjet JVA and the Waterfall relay activate at the same time,
Can I make them activate independently? I am not clear whether I can configure the system to get independent control of the waterfall relay. Do you know?