Aqualink Question

Jump to latest Follow Reply
wireform

wireform

Gold Supporter
Silver Supporter
TFP Guide
In The Industry
Aug 15, 2017
7,896
Spring Valley, NY
Customer with Aqualink RS (see pictures)
pda is more or less shot and unusable so there's no way to adjust/set anything anymore. It's running on the last programming but unable to change anything including the cell production.
Question, is there a way to at least change cell settings from the panel or not even that.
Also, can I just get another PDA and program it to the panel or perhaps it's time for the next generation upgrade using phone apps and the like which is something they may be into. What would be the best upgrade for the panel pictured below and how difficult is it to complete. Never dealt with jandy stuff.
Screenshot_20240913_094808.jpgScreenshot_20240913_094757.jpgScreenshot_20240913_094857.jpgScreenshot_20240913_094821.jpgScreenshot_20240913_094830.jpgScreenshot_20240913_094840.jpg
 
You have the Aquapure SWG control panel on the left of the Aqualink panel. You should be able to change the SWG settings from the Aquapure controls. You may need to disconnect the Aquapure from the Aqualink to get local control by disconnecting the cable at J12.

1726237465575.png

@PoolGate may be able to answer about how to change out the PDA for a working one.

To upgrade the system to phone app control and get rid of the PDA you need the Jandy IQ30-RS Upgrade kit. That replaces the Aqualink board and has a WiFi antenna. The PCB swap is not difficult. You will then have to do the setup and programming of the system.
 
Thanks @ajw22 , will be on that later to verify I can do what you explained.
ajw22 said:
You will then have to do the setup and programming of the system
Click to expand...
Do you mean connecting it up to a laptop, or is it via the phone or computer with the app. Niddy gritty firmware stuff isn't my forte bit settings on the actual program via the app shouldn't an issue.
 
wireform said:
Thanks @ajw22 , will be on that later to verify I can do what you explained.

Do you mean connecting it up to a laptop, or is it via the phone or computer with the app. Niddy gritty firmware stuff isn't my forte bit settings on the actual program via the app shouldn't an issue.
Click to expand...

You program the Aqualink through the app on a phone or PC that connects to the panel by WiFi.
 
  • Like
Reactions: PoolGate
You must log in or register to reply here.
Top Bottom
Back
Jump to latest Follow Reply