The salt reading is to high on the Aqua Rite board, try to reset and the Diagnostics bottom stop working, it doesn't change, it's steady on 3800, the test we made made and the pool store test is very similar 3140 and 3220, the temp. is 88 F. that may affect the high reading, but what about the diagnostic bottom, thanks for any help
Aqua Rite issue
- Thread starter elgaucho
- Start date
- Jul 21, 2013
- 53,050
- Pool Size
- 35000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
What model cell do you have?
What is the cell serial number?
Post a pic of the cell?
Is the cell a genuine Hayward T cell or a 3rd party clone?
What is the cell serial number?
Post a pic of the cell?
Is the cell a genuine Hayward T cell or a 3rd party clone?
Wrong and erratic reading on AquaRite Display
We set up the OnComand System and AquaRite Clorinator on February 2013 on an in ground 20000 Gl. pool, since then already the variable speed pump was replaced about 2 years ago and the AquaRite PCB 6-month after both under guaranty. I do have a LaMotte 2056 ColorQ that I have been using for...
www.troublefreepool.com
Your button does not stick out very far, which might be due to a bent cover plate.
Does the diagnostic button work with the front metal panel off?
Does the diagnostic button work with the front metal panel off?