On my Aqua Rite chlorine generator, I cannot set my salt level lower than 3900. I follow the directions to manually set the salt level and it starts at 4000, then eventually goes to 3900, but it will not go any lower. I somehow got it set to about 3700 one time, but several days later it reset to 4000.
I believe something is wrong (obviously), and even though it says it is generating, I have been showing low chlorine. I replaced the board with the official Hayward piece less than a year ago. And the salt cell is only 5 months old.
My latest set of readings are:
3900
90
27.5
3.79
89p
-4000
AL1
1.59
T3
I believe something is wrong (obviously), and even though it says it is generating, I have been showing low chlorine. I replaced the board with the official Hayward piece less than a year ago. And the salt cell is only 5 months old.
My latest set of readings are:
3900
90
27.5
3.79
89p
-4000
AL1
1.59
T3