Hi all - getting ready for a fairly thorough renovation of an old pool. Below are my main points that i intend to send out to a few local PBs. Please let me know if I am missing anything or need to be more specific. My initial post about what i am trying to do is here
Heading down renovation road...
Thanks for any thoughts!
Pool Resurfacing
Deck Resurface and Prepare
Potential Additional Work to be Discussed / Priced
Additional
Heading down renovation road...
Thanks for any thoughts!
Pool Resurfacing
- Drain pool
- Remove all tile and discard
- Remove coping and discard
- Repair and prepare setting bed
- Install new tile around perimeter of pool
- Install new tile around edges of stairs (this is a new feature)
- Install tile in skimmer throats
- Install new coping
- Install new skimmers (to be discussed - will larger skimmers help with maintenance)
- Prepare pool for new plaster (be specific about prep methods)
- Apply new plaster
- Pricing options for regular white
- Pricing options for diamond Brite or similar
- Fix leak in shallow skimmer line
- Pressure test system
- Fill pool
Deck Resurface and Prepare
- Remove paint from deck
- Fix deck where it has sunk along back long edge of pool (deck is lower than coping)
- This is also where the skimmer leak is, so probably need to jackhammer the concrete out, fix skimmer line, and pour replacement concrete
- Patch and resurface deck with all new kool deck or similar – many areas have bad / mismatched patches
- Install drainage around back of large deck area – channels, sump pump, whatever
- New deck-o-seal or equivalent between deck and coping
Potential Additional Work to be Discussed / Priced
- Install lights in pool
- Upgrade equipment for remote monitoring / control (ie be able to turn on heat from remote location)
- Auto-fill
- Consider conversion to salt water chlorination system
Additional
- Additional cost for brushing and initial maintenance
- Warranty details