I am helping my neighbor with her pool and have an issue.....
The SWG is a Compupool T-15 cell and I don't know how old it is. I don't think it is making chlorine but it has been 60 degrees and overcast here. I have been running it 10 hours per day and the FC is dropping very slightly each day, pH is 7.6. On the Hayward Swim Pure Panel, the "inspect cell" and "low salt" started flashing but the green "Generating" was on. I checked the salt level with the Taylor Kit and it was 3000.I also used Muriatic Acid and cleaned the inside of the SWG really well. The "Inspect Cell and "Low Salt" light went out but came back on 10 days later. Leslie's says the cell pass their test.
Is it possible that the cell is "dead" but the green "Generating" light is on?![Confused :confused: :confused:](data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7)
Thanks!
The SWG is a Compupool T-15 cell and I don't know how old it is. I don't think it is making chlorine but it has been 60 degrees and overcast here. I have been running it 10 hours per day and the FC is dropping very slightly each day, pH is 7.6. On the Hayward Swim Pure Panel, the "inspect cell" and "low salt" started flashing but the green "Generating" was on. I checked the salt level with the Taylor Kit and it was 3000.I also used Muriatic Acid and cleaned the inside of the SWG really well. The "Inspect Cell and "Low Salt" light went out but came back on 10 days later. Leslie's says the cell pass their test.
Is it possible that the cell is "dead" but the green "Generating" light is on?
Thanks!