Pool has been doing very well and testing is going well on my own. Today I had to run a sample to my Leslie’s store so I could get my CYA tested since I ran out of fluid and it’s been a while since I tested. They said my numbers were really good but said I needed to add 3lbs of Baking soda since my “adjusted TA” was 62, however my home test was 90-100. This appears to be new from them as I trust the guy who runs the store, he actually supports this site. He said that I need to always adjust because my CYA is running At 89. Pool seems perfectly fine to me. I know never trust a pool guy but he literally didn’t want to sell me anything and actually gave me R-13 fluid to fill my jug.
here are my numbers as I know you always want them.
FC-10
CC-0
PH-7.8
TA-100 maybe 90, might have miscounted but it’s been 100
CH-300
CYA-89 according to the store.
I had tons of problems last season with keeping my levels right so I want to be ahead of the curve. Any advice on the adjusted TA?
here are my numbers as I know you always want them.
FC-10
CC-0
PH-7.8
TA-100 maybe 90, might have miscounted but it’s been 100
CH-300
CYA-89 according to the store.
I had tons of problems last season with keeping my levels right so I want to be ahead of the curve. Any advice on the adjusted TA?