The spot is right by the steps opposite of the stainless steel for skimmer and return. It was caused by the wratchet for winter cover rubbing. Saw it last summer, but didn't get to it as my dad passed away at the end of the summer.
I found fairoaksproducts.com a place that sells stainless inserts for pool walls to replace skimmers and returns. My pool has stainless section for that. They sell an 8 inch by 8 inch piece of stainless for about 25 bucks and comes with all the hardware and drill bit to fix.
Has anyone done this and can anyone give me some tips on doing so successfully so this does not cost me a new liner in the process?
Thanks in advance for the help guys.
I found fairoaksproducts.com a place that sells stainless inserts for pool walls to replace skimmers and returns. My pool has stainless section for that. They sell an 8 inch by 8 inch piece of stainless for about 25 bucks and comes with all the hardware and drill bit to fix.
Has anyone done this and can anyone give me some tips on doing so successfully so this does not cost me a new liner in the process?
Thanks in advance for the help guys.