The streaks are brush marks, but here is the algae (image posted below). Before starting this process I'm going to remove all the debris pictured at the bottom.
Test levels: CYA 50, pH 7.8, FC 6 and 0 CC.
Disclaimer, I did add Clorox Shock XtraBlue2 and 1 gallon of liquid chlorine a week ago but I don't think I was thorough with my brushing and I did not leave the pump running 24/7 (I know I know, agh). What should my SLAM target FC be? Pool math says 20 but also states "Your target is outside the recommended range!". I'm unsure how I should proceed. Thank you for the help.
Ingredients in the Clorox product:
Test levels: CYA 50, pH 7.8, FC 6 and 0 CC.
Disclaimer, I did add Clorox Shock XtraBlue2 and 1 gallon of liquid chlorine a week ago but I don't think I was thorough with my brushing and I did not leave the pump running 24/7 (I know I know, agh). What should my SLAM target FC be? Pool math says 20 but also states "Your target is outside the recommended range!". I'm unsure how I should proceed. Thank you for the help.
Ingredients in the Clorox product:
The filter has been thoroughly cleaned. Pool size 13,500 galSodium dichloro-s-triazinetrione....63.05% Copper (metallic)*** 0.26% OTHER INGREDIENTS 36.69% TOTAL INGREDIENTS 100.00% (Available Chlorine: 39%) **Derived from copper citrate
Last edited: