A mystery to me: Why can't I get prime?

[Jimrahbe]

Brad,

Well, at least now you know for sure that ripping up the deck is the only option.

Glad you got the problem narrowed down.

Thanks,

Jim R.

 

[Flying Tivo]

Another idea would be to just cancel that skimmer and install another skimmer on a more accesible point on your pool. Just make sure to hard pipe and no flexible PVC.

 

[brad2167]

Another idea would be to just cancel that skimmer and install another skimmer on a more accesible point on your pool. Just make sure to hard pipe and no flexible PVC.

Yeah. I have had plans for a major deck renovation and this may just move the schedule up. There are not many (or any) "accessible" spots as it is currently installed, unfortunately. - Brad

 

[duraleigh]

Looking at your photos, it seems quite feasible to remove some deck boards and replace the flex with hard plumbing. Maybe I am not seeing the whole picture but I don't see anything that is particularly difficult. Flex is BAD MOJO!

 

[brad2167]

Looking at your photos, it seems quite feasible to remove some deck boards and replace the flex with hard plumbing. Maybe I am not seeing the whole picture but I don't see anything that is particularly difficult. Flex is BAD MOJO!

Yes. Most of the path is pretty easy to work with. The framing they put around the skimmer and structure of the deck in that area is a bit of a challenge.

Plus, I want a new deck anyway, so it may become a new project.

Or if that is not prudent, a patch job for a year or two.

 

[wireform]

Just so you know the temp pipe is very dangerous as far as a suction port where a swimmer can get stuck on the pipe end. Please remove this as now you have your sought-after answer.

 

[Newdude]

+1. Make it as safe as it needs to be for your situation, or ensure it is off when you have swimmers.