I will try not to make this a story.
Pool
Lost pool cover in Jan. Some leaves in bottom of pool.
Have been dipping off and on for most of day. Most are in the center now.
added 2 pds granular sanitizer that i had laying around yesterday before i found the SLAM instructions so
know i have no idea if my PH is correct. Got up this morning i was able to at least see the brown blobs of leaves (couldn't
see that yesterday) and
added 2 gal of liquid chlorine kemtec brand this morning .
Went to town could not find the FAS-dpd kit at leslies so i got the DPD kit and have tested my water
according to the instructions. This is what i got with the test Kit
FC 5ppm
TC 5ppm
if i calculate it right that would be 0 FC correct?
CYA 35PPM
PH has got to be above 8.0 because its color looks to be brighter then 8.0
So i have looked at the chlorine/cya chart but i am confused. I do have a salt system but it is not plugged in right now
as i figured it more important to get the green out of the pool first.
So, do i need to stop and get my PH correct and then proceed with the SLAM?
Do i follow the chlorine/cya chart for a SWG or NonSWG?
Just a few of my million question :grin:
- - - Updated - - -
well i guess my siguature didn't add so here it goes:
East Texas
16x48 above ground metal frame intex pool
new 1500 filter pump
intex salt system
Pool
Lost pool cover in Jan. Some leaves in bottom of pool.
Have been dipping off and on for most of day. Most are in the center now.
added 2 pds granular sanitizer that i had laying around yesterday before i found the SLAM instructions so
know i have no idea if my PH is correct. Got up this morning i was able to at least see the brown blobs of leaves (couldn't
see that yesterday) and
added 2 gal of liquid chlorine kemtec brand this morning .
Went to town could not find the FAS-dpd kit at leslies so i got the DPD kit and have tested my water
according to the instructions. This is what i got with the test Kit
FC 5ppm
TC 5ppm
if i calculate it right that would be 0 FC correct?
CYA 35PPM
PH has got to be above 8.0 because its color looks to be brighter then 8.0
So i have looked at the chlorine/cya chart but i am confused. I do have a salt system but it is not plugged in right now
as i figured it more important to get the green out of the pool first.
So, do i need to stop and get my PH correct and then proceed with the SLAM?
Do i follow the chlorine/cya chart for a SWG or NonSWG?
Just a few of my million question :grin:
- - - Updated - - -
well i guess my siguature didn't add so here it goes:
East Texas
16x48 above ground metal frame intex pool
new 1500 filter pump
intex salt system