My wife and I recently purchased a house with a pool. The pool was installed sometime after the house was built, I believe it is about 4-5 years old. I've been maintaining it using the TFP methods since we took posession of the house, and so far have had no problems.
I recently discovered that the filter, the pump, and the booster pump for the Polaris are not fastened to the concrete pad. Should I be concerned about that? It would be simple to fasten the filter down with Tapcon screws, but the pumps would be more difficult, and I'd rather not go to the trouble of fastening everything down if it's not necessary.
Here's a photo of the equipment:
Thanks,
Russ
I recently discovered that the filter, the pump, and the booster pump for the Polaris are not fastened to the concrete pad. Should I be concerned about that? It would be simple to fasten the filter down with Tapcon screws, but the pumps would be more difficult, and I'd rather not go to the trouble of fastening everything down if it's not necessary.
Here's a photo of the equipment:
Thanks,
Russ