We had a big lightening strike at the heater area. Has not worked since. Looks like an error code PR 6. Does not click anymore when I try to turn it on. I think its the board. Any ideas?
I REPLACED THE CHECK VALVE BUT IT STILL LEAKS BY WHEN THE PUMP IS OFF. I CAN CLOSE A MANUAL VALVE AND STOP IT BUT WHEN PUMP COMES BACK ON THEN MY SPRAYERS COME ON TILL i GO OPEN THE VALVE. I ONLY PUT A NEW FLAPPER NOT THE WHOLE VALVE BODY.
If you can close a valve and stop the draining, then it seems like you have isolated the problem. The check valve or a 3-way valve must still be leaking.
Was the correct flapper installed to the right body of the check valve? I had this happened to me Jandy flapper on Compool check valve body...won't work.
Hello , This thread has been inactive for over 60 days. New postings here are unlikely to be seen or responded to by other members. For better visibility, consider Starting A New Thread.
Welcome to TFP! For a wealth of pool care information please check out our free Pool School. If you are in need of specific help then we encourage you to Register and ask us here in the forum!