- Apr 27, 2013
- 11
I have a 16x32 vinyl in ground pool.
It is a new install, in the Fall of 2013.
I have a Hayward S210T sand filter. I did a great job of closing my pool down for the Fall, but I noticed that I forgot to put the pump in the "Winter" setting over the winter.
I have kicked the pump off, and it seems to be working fine. Is there anything I should be looking for since I made the mistake of not putting the pump to the "winter" setting. I live in Georgia, so it doesn't get very cold here over the winters.
Also, I noticed that my pressure gauge is not working on my sand filter. It looks as though the needle is on the wrong side of the pin at zero. I turned the pump off and restarted it a few times. I guess I'll have to order a new pressure gauge and replace it.
Thanks for any advice,
CharlieBear
It is a new install, in the Fall of 2013.
I have a Hayward S210T sand filter. I did a great job of closing my pool down for the Fall, but I noticed that I forgot to put the pump in the "Winter" setting over the winter.
I have kicked the pump off, and it seems to be working fine. Is there anything I should be looking for since I made the mistake of not putting the pump to the "winter" setting. I live in Georgia, so it doesn't get very cold here over the winters.
Also, I noticed that my pressure gauge is not working on my sand filter. It looks as though the needle is on the wrong side of the pin at zero. I turned the pump off and restarted it a few times. I guess I'll have to order a new pressure gauge and replace it.
Thanks for any advice,
CharlieBear