I just opened the pool yesterday. The pool had been covered all the time it's been closed.
FC: 0
PH: 7.5
TA: 110
CYA: 80
SALT" 3000
Water is clear
After I measured yesterday, I added 24oz of chlorine. Today, I measured again and FC=0. Added 24oz of chlorine. Checked back after 45min. FC = 1. Added another 24 oz.
During the closed time, once in a while I ran the SWG. Is something wrong here?
Since yesterday:
I added a 5 lb of salt to bring up to 3200 ppm
Been working on bring down PH. Adding acid to bring PH and TA down. Today TA = 100. Keep adding acid and doing aeration.
FC: 0
PH: 7.5
TA: 110
CYA: 80
SALT" 3000
Water is clear
After I measured yesterday, I added 24oz of chlorine. Today, I measured again and FC=0. Added 24oz of chlorine. Checked back after 45min. FC = 1. Added another 24 oz.
During the closed time, once in a while I ran the SWG. Is something wrong here?
Since yesterday:
I added a 5 lb of salt to bring up to 3200 ppm
Been working on bring down PH. Adding acid to bring PH and TA down. Today TA = 100. Keep adding acid and doing aeration.