Yesterday I replaced the plumbing line that connects my pump and filter. However, when I turned on the pump today, there is water leaking at both ends. I've used steel clamps to secure the tiger flex line, but no I'm wondering if I should also be using primer and pvc cement or should the clamps be positioned differently?
Here is a picture of the tiger flex pipe and the connector before they are secured.
Here is pictures of the the two pieces after they are secured by steel clamps on both ends (you can see water dripping in the 2nd pic):
I should add that the blue pvc cement seen in the pics was used to connect the two plastic pieces (white and grey in first pic) that I'm attaching the flex pipe to. The pool store actually did this for me.
Thank you
Here is a picture of the tiger flex pipe and the connector before they are secured.
Here is pictures of the the two pieces after they are secured by steel clamps on both ends (you can see water dripping in the 2nd pic):
I should add that the blue pvc cement seen in the pics was used to connect the two plastic pieces (white and grey in first pic) that I'm attaching the flex pipe to. The pool store actually did this for me.
Thank you