here it is....
[attachment=0:1zvweo96]ladder.jpg[/attachment:1zvweo96]
platform was $16 from intex replacement parts.
I removed the two blue side braces and this slid in its place.
The platform is supposed to be attached to the rails from the front vs the sides the blue braces were bolted on the sides.
To bolt it from the side like how the blue braces were I will not be able to use the white plastic nut as the platform is in the way. I think I might just use the bolt and thread it into the platform itself without using the nut.
OR
Will need to drill on angle of legs and bolt from front to back.....
The platform still rests on the top rails of the pool, just like the blue braces did. I really dont like this as it sometimes likes to see-saw.
I did notice that the 52" intex ladder comes with the platform and would eliminate my resting on the top rail problem, but its $70 without the shipping
I might try adding some pool noodles to the feet of the ladder, just to get enough room to not see-saw.
[attachment=0:1zvweo96]ladder.jpg[/attachment:1zvweo96]
platform was $16 from intex replacement parts.
I removed the two blue side braces and this slid in its place.
The platform is supposed to be attached to the rails from the front vs the sides the blue braces were bolted on the sides.
To bolt it from the side like how the blue braces were I will not be able to use the white plastic nut as the platform is in the way. I think I might just use the bolt and thread it into the platform itself without using the nut.
OR
Will need to drill on angle of legs and bolt from front to back.....
The platform still rests on the top rails of the pool, just like the blue braces did. I really dont like this as it sometimes likes to see-saw.
I did notice that the 52" intex ladder comes with the platform and would eliminate my resting on the top rail problem, but its $70 without the shipping
I might try adding some pool noodles to the feet of the ladder, just to get enough room to not see-saw.