My salt cell (T-15) seems to be running flat out, no matter what I do.
I set the percentage down to 0; the diagnostic menu says "chlorinator off; percentage reached", but after another 24 hours, my FC is still reading in the 14 range.
I also tried unplugging it from the controller and then plugging it back in - that didn't do it either.
For now, I have unplugged it and left it powered off. I need the FC to drop so that I can get an accurate pH reading and make sure my water is balanced.
Has anyone ever seen this behavior? Suggestions on other things to try? Any guesses on whether it is the controller or the SWG?
Thanks,
SF
I set the percentage down to 0; the diagnostic menu says "chlorinator off; percentage reached", but after another 24 hours, my FC is still reading in the 14 range.
I also tried unplugging it from the controller and then plugging it back in - that didn't do it either.
For now, I have unplugged it and left it powered off. I need the FC to drop so that I can get an accurate pH reading and make sure my water is balanced.
Has anyone ever seen this behavior? Suggestions on other things to try? Any guesses on whether it is the controller or the SWG?
Thanks,
SF