ok, still going around on the timer with the pb. He says he typcially uses the 01200 box but the problem is that's not for a dual speed pump. Can he still use that box but swap out the inside of the box with something that will conrol the dual speed pump? Or should I just manually switch the pump when I need to and not worrry about a timer that controls both speeds? Someone mentioned the T004/T106 combo. Is this either the 104 or 106 or are the used together. This is mostly greek to me so any help is greatly appreciated Again, I have the hayward dual speed super pump 1.5hp a separate polars pump, light and SWG.