I will admit that I am newer to pool repair. I have a background in general repair and HVAC. I work on a government facility and I have recently been put in charge of two pools on the base. I have a 45M5 feeder pump at one of the pools that was ordered prior to me being put in charge of maintaining them. The pump that was on there prior was a 170DM5 but it was determined that a double feeder was too big for this pool in question. I replaced the pump however, I cannot get the line or the pump to prime. I have made sure that the lines are in the chlorine and that they are not clogged. I have also apologize in advance if this is an easy fix and I am just missing something stupid.
45M5 chlorine pump won't stay primed
- Thread starter ChupaThingy6173
- Start date
- Jun 22, 2014
- 47,854
- Pool Size
- 17888
- Surface
- Fiberglass
- Chlorine
- Salt Water Generator
- SWG Type
- CircuPool RJ-45 Plus
Good morning and welcome to TFP! 
Could you perhaps post some pics of the equipment? It may help us to see all the lines, connections, etc with this set-up.
Could you perhaps post some pics of the equipment? It may help us to see all the lines, connections, etc with this set-up.Sorry for the delay. Here are a couple picturesGood morning and welcome to TFP!
