3d Model for Pentair MagicStream deck jet cover

[generessler]

Hi all. Just so no one else needs to duplicate this bit of work, here is a 3d model for the top cover of a "MAGICSTREAM® DECK JET II WATER FEATURE".

Part number depends on color. Tan is 590150. Bronze is 590042.

They are $40 to $70 retail. Yikes. My son-in-law printed one for me of PETG, which has weathered perfectly so far during 18 months in direct sun much of the day. It's about .5mm smaller than "snug," so just a bit loose. I scaled it up by 1.01. Ought to be a perfect fit now. Material cost is under $2.

I'm kind of curious about how others have used 3d printers for pool stuff.

Cheers.

 

[dgreenb]

Nice!
I designed and printed an angled vacuum skimmer cover, so you could just run the vac hose over the weir door. All I could find at the time where ones with the hose coming straight up. I printed in petg and it's been stable in the Texas sun for about a year
I should probably put it up on printables some time ..

 

[YippeeSkippy]

How cool is this!?? This is a great help for others, I'm sure. We'll have it in the archives for the next person

Just recently I suggested to someone to find a 3D operating friend to duplicate a minor part missing from his robot.

The wave of the future, eh?