I don't have a proper test kit (new owner) yet so I took my water into the local store and this is what the sheet says I got back:
FC - 6.6
TC - 9.9
CC - 3.3
pH - 7.9
Hardness - 270
Alkalinity (with stabilizer correction) - 117
CYA - 10
* Water is clear (need to vacuum though)
I live in southern Ontario. Canada and I haven't used the pool in a month and it has just been sitting with the solar cover on. I should have turned the SWG down for the colder temp so I am guessing that is why the Chlorine levels are high.
Should I be doing any adjustments before I close the pool? or are these #'s ok and not to worry.
I have a IG Fiberglass Pool /w SWG; Gallons: 16,100; Filter: Cartridge
FC - 6.6
TC - 9.9
CC - 3.3
pH - 7.9
Hardness - 270
Alkalinity (with stabilizer correction) - 117
CYA - 10
* Water is clear (need to vacuum though)
I live in southern Ontario. Canada and I haven't used the pool in a month and it has just been sitting with the solar cover on. I should have turned the SWG down for the colder temp so I am guessing that is why the Chlorine levels are high.
Should I be doing any adjustments before I close the pool? or are these #'s ok and not to worry.
I have a IG Fiberglass Pool /w SWG; Gallons: 16,100; Filter: Cartridge