Good morning!
Trying to find a solution to keep CL in pool.
36000 gal inground vinyl liner
SWC intellichlor IC40 (2nd season)
Taylor Test Kit
Levels this morning:
FC 0
CC .5
PH 7.5
CA 80
TA 90
HARDNESS 210
Salt reading high this morning at 3800 recommended 3400.
Water is clear but not lively. Last week worked for 2 days getting TA and PH within range. (lower then arete)
Ph was 7.9 yesterday added acid and it returned to 7.5.
Why am I not generating enough CL
Also with a CA of 80 and a TA of 90 should the TA be higher?
The CA may go higher in a few days as I added CA last friday.
When taking a test at the return CL is reading 2.0 but no reading elsewhere in the pool.
Shocked last week w/ bleach (cloudy water) after high temps and high bather load cleared up over nite but did not hold CL.
Been running generator at 100% for 3 days....
Been a pool owner for aver 20 years never had a problem of pool not holding CL.
Thinking I should shock again? Then add fresh water to reduce the salt??
Thanks in advance.
Nancy
Trying to find a solution to keep CL in pool.
36000 gal inground vinyl liner
SWC intellichlor IC40 (2nd season)
Taylor Test Kit
Levels this morning:
FC 0
CC .5
PH 7.5
CA 80
TA 90
HARDNESS 210
Salt reading high this morning at 3800 recommended 3400.
Water is clear but not lively. Last week worked for 2 days getting TA and PH within range. (lower then arete)
Ph was 7.9 yesterday added acid and it returned to 7.5.
Why am I not generating enough CL
Also with a CA of 80 and a TA of 90 should the TA be higher?
The CA may go higher in a few days as I added CA last friday.
When taking a test at the return CL is reading 2.0 but no reading elsewhere in the pool.
Shocked last week w/ bleach (cloudy water) after high temps and high bather load cleared up over nite but did not hold CL.
Been running generator at 100% for 3 days....
Been a pool owner for aver 20 years never had a problem of pool not holding CL.
Thinking I should shock again? Then add fresh water to reduce the salt??
Thanks in advance.
Nancy