- Apr 26, 2011
- 5
I have a question that has been troubling me a little bit. I'm running into a problem trying to replace my light niche on my inground pool, my pool is 8" concrete walls and has a vinyl liner. The liner is about to be replaced and the pool is drained. The patio surrounding the pool has also not yet been put down so i have access to all of the lines and the junction box. I removed the light and have placed it on the top of the pool. I removed the liner and foam surrounding the light housing and attempted to remove the niche with no success. I dug out behind the light to expose the conduit and see that there is only one hole coming out from the concrete wall which is where the conduit for the electric line comes through. I would like to replace the housing because the copper ring that the wire goes through looks as if it is wearing a little bit. I have a stainless steel american products model 5 housing.
can anyone tell me how to remove the light niche/housing? Im certain it is cemented or caulked in place, but i don't want to pry it out without knowing for certain. any help would be appreciated. i would hate to spend 800 bucks on the replacement that the liner company wants to charge.
Thank you,
Brian
can anyone tell me how to remove the light niche/housing? Im certain it is cemented or caulked in place, but i don't want to pry it out without knowing for certain. any help would be appreciated. i would hate to spend 800 bucks on the replacement that the liner company wants to charge.
Thank you,
Brian