My Pentair Intellitouch is not functioning properly (purchased 2006). It continues to run the filter based on a previously established program while in "Auto" mode, but no other controls work on the outdoor control panel or on the remote. I can switch to "Service" mode and then the buttons on the outdoor control panel work to control the pumps, automatic valves and lights.
I've tried resetting the circuit breaker for the control panel and hitting the "Reset" button on the control panel. I've also tried pushing the mini circuit breakers on the panel itself, but I'm not sure that did anything.
Any advice? Thanks in advance.
--
Ron Page
Mesa, Arizona
I've tried resetting the circuit breaker for the control panel and hitting the "Reset" button on the control panel. I've also tried pushing the mini circuit breakers on the panel itself, but I'm not sure that did anything.
Any advice? Thanks in advance.
--
Ron Page
Mesa, Arizona