I just had a backwash valve installed on my Pentair Quad DE 60 filter. It is the push pull type p/n 263064. When it was installed the installer said the user guide would have the instructions for use.
Is this process as easy as turn off pump,relieve pressure at air relief valve,handle up for backwash,turn pump on,wait until water runs clear,turn pump off,slide handle down to filtering position and turn pump back on. He also said to watch the pressure gauge, but I should backwash every 3weeks.
Can someone please verify that I have the instructions correct.
Thanks for any information.
San Marcos,California 20K Pool, Pentair DE, Above Ground, Pebble Tec 1/2 HP Whisperflow Pump 160gpm,IntelliChor SWG
Is this process as easy as turn off pump,relieve pressure at air relief valve,handle up for backwash,turn pump on,wait until water runs clear,turn pump off,slide handle down to filtering position and turn pump back on. He also said to watch the pressure gauge, but I should backwash every 3weeks.
Can someone please verify that I have the instructions correct.
Thanks for any information.
San Marcos,California 20K Pool, Pentair DE, Above Ground, Pebble Tec 1/2 HP Whisperflow Pump 160gpm,IntelliChor SWG