Here are my numbers:
FC = 7
CC = 0
TC = 7
pH = 7.6
CH = 310
TA = 90
CYA = 80
Salt = 3200
My pool has a built-in spa that is attached to the pool and the water flows from it into the pool and there are also 4 returns in the pool itself. All the returns are on and water is flowing everywhere it should. I did an overnight test this past weekend, no CC and no FC loss. It's been really hot here and I just wanted to make sure everything was on the up and up.
Here's the weird part, today when I got home, did my daily FC and pH test and as I walked by the spa, I found a couple small patches of what looks like yellow/brown algae in the spa where the bench meets the wall. I tested the spa and had the same results as the pool sample a couple minutes earlier. I guess I will do another overnight FC test this weekend, but it just seems weird that it shows up in spa and not the pool and I have not let the FC go below 6 the last couple weeks...
Thoughts?
FC = 7
CC = 0
TC = 7
pH = 7.6
CH = 310
TA = 90
CYA = 80
Salt = 3200
My pool has a built-in spa that is attached to the pool and the water flows from it into the pool and there are also 4 returns in the pool itself. All the returns are on and water is flowing everywhere it should. I did an overnight test this past weekend, no CC and no FC loss. It's been really hot here and I just wanted to make sure everything was on the up and up.
Here's the weird part, today when I got home, did my daily FC and pH test and as I walked by the spa, I found a couple small patches of what looks like yellow/brown algae in the spa where the bench meets the wall. I tested the spa and had the same results as the pool sample a couple minutes earlier. I guess I will do another overnight FC test this weekend, but it just seems weird that it shows up in spa and not the pool and I have not let the FC go below 6 the last couple weeks...
Thoughts?