G
Guest
I have a spa with an air button/tubing setup. Problem is my air tubing is partially buried and practically not repairable (due to a house addition project a few years back where it was accidentally cut, but decided not to be worth repairing...) Is it possible to replace the air button with a wireless electronic button that sends a trigger to X10 to turn on/off a pump?
Seems like I'd need three parts:
1) X10 wireless trigger button (does this exist?) that replaces the actual physical air button. Likely powered by a small watch battery.
2) X10 wireless receiver that plugs into house's electric.
3) Actually X10 switch that connects directly to the pump, ie this http://www.smarthome.com/manuals/2210xi_man.pdf
Any ideas if #1 (or #1 and #2 in combo) exist?
Seems like I'd need three parts:
1) X10 wireless trigger button (does this exist?) that replaces the actual physical air button. Likely powered by a small watch battery.
2) X10 wireless receiver that plugs into house's electric.
3) Actually X10 switch that connects directly to the pump, ie this http://www.smarthome.com/manuals/2210xi_man.pdf
Any ideas if #1 (or #1 and #2 in combo) exist?